ASTM A933/A933M-2010 加固用乙烯基(PVC)镀层钢丝和焊接钢丝网的标准规格

作者:标准资料网 时间:2024-05-10 18:09:33   浏览:9415   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:StandardSpecificationforVinyl-CoatedSteelWireandWeldedWireReinforcement
【原文标准名称】:加固用乙烯基(PVC)镀层钢丝和焊接钢丝网的标准规格
【标准号】:ASTMA933/A933M-2010
【标准状态】:现行
【国别】:
【发布日期】:2010
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:A01.05
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:涂层要求;钢筋混凝土;耐腐蚀性;钢丝;乙烯基镀层;包铜钢丝强化;乙烯基(PVC)镀层钢丝网
【英文主题词】:coatingrequirements;concretereinforcement;corrosionresistance;steelwire;vinylcoating;weldedwirereinforcement;Vinyl-PVC-coatedsteelwirefabric
【摘要】:1.1Thisspecificationcoversplainanddeformedsteelwireandplainanddeformedsteelweldedwirereinforcementwithprotectivevinyl(polyvinylchloride,orpolyvinylchloridepowdercompound)coating.AClassAminimumcoatingthicknessisrequiredforwireandweldedwirereinforcementintendedforuseinconcreteandmasonry.AClassBminimumcoatingthicknessisrequiredforwireandweldedwirereinforcementintendedforuseinmechanicallystabilizedearthapplications.1.2Otherthermoplasticorganiccoatingsmaybeusedprovidedtheymeettherequirementsofthisspecification.Note18212;Thecoatingapplicatorisidentifiedthroughoutthisspecificationasthemanufacturer.1.3RequirementsforcoatingsarecontainedinAnnexA1.1.4RequirementsforpatchingmaterialsarecontainedinAnnexA2.1.5Thetextofthisspecificationcontainsnotesorfootnotes,orboth,thatprovideexplanatorymaterial.Suchnotesandfootnotes,excludingthoseintablesorfigures,donotcontainanymandatoryrequirements.1.6Thisspecificationisapplicableforordersineitherinch-poundunits(asSpecificationA933)orinSIunits[asSpecificationA933M].1.7Thevaluesstatedineitherinch-poundunitsorSIunitsaretoberegardedseparatelyasstandard.Withinthetext,theSIunitsareshowninbrackets.Thevaluesstatedineachsystemmaynotbeexactequivalents;therefore,eachsystemshallbeusedindependentlyoftheother.Combiningvaluesfromthetwosystemsmayresultinnon-conformancewiththestandard.
【中国标准分类号】:H49
【国际标准分类号】:77_140_15
【页数】:11P.;A4
【正文语种】:


下载地址: 点击此处下载
基本信息
标准名称:PN250a 双头螺柱型式、尺寸和技术条件
英文名称:Types,dimensions and specifications of PN250 MPa stud bolts
中标分类: 机械 >> 通用零部件 >> 阀门
ICS分类: 流体系统和通用件 >> 阀门
替代情况:JB 1321-1973;被JB/T 1308.14-2011代替
发布部门:全国阀门标准化技术委员会
发布日期:1999-07-12
实施日期:2000-01-01
首发日期:1900-01-01
作废日期:2011-08-01
归口单位:全国阀门标准化技术委员会
出版日期:1900-01-01
页数:3 页
批文号:国机管[1999]390号
适用范围

JB/T 1308.14-1999 本标准是对 JB 1321-73《Pg(2500kgf/cm2)双头螺柱 型式、尺寸和技术要求》的修订。 本标准规定了超高压阀门用双头螺柱型式、尺寸和技术要求等。 本标准适用于公称压力 250MPa 的乙烯、聚乙烯等中性介质的双头螺柱。 本标准于 年 月 日首次发布。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 通用零部件 阀门 流体系统和通用件 阀门
Product Code:SAE J885
Title:Human Tolerance to Impact Conditions as Related to Motor Vehicle Design
Issuing Committee:Human Biomechanics And Simulations Standards Steering Cmte
Scope:This report reviews current quantitative data on human tolerance levels without recommending specific limits. Data developed on humans (including cadavers) are presented where available; however, in many cases animal data are provided where no suitable human results have been reported. This report confines itself, as much as possible, to information of direct use to the automotive designer and tester. Data of only academic interest are largely omitted; therefore, J885 should not be considered as a complete summary of all available biomechanical data.Most of the data cited in this report applies to adult males since little information is available on women or children. The summary data provided in the tables should be considered with the accompanying descriptive test. This material explains the manner in which the data were obtained and provides an insight as to their limitationsThe purpose of this reort is to assist the automotive safety designer and tester by providing them with quantitative data on the strength of the human body under impact loading conditions.