SAE J1666 Electric Vehicle Acceleration, Gradeability, and Deceleration Test Procedure (Cancelled Oct 2002)

作者:标准资料网 时间:2024-05-22 18:14:11   浏览:9723   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE J1666
Title:Electric Vehicle Acceleration, Gradeability, and Deceleration Test Procedure (Cancelled Oct 2002)
Issuing Committee:Light Duty Vehicle Performance And Economy Measure Committee
Scope:This SAE Recommended Practice establishes uniform procedures for testing electric battery-powered vehicles which are capable of being operated on public and private roads. It is the intent of this document to provide standard tests which will allow various performance characteristics of electric vehicles to be cross-compared on a common basis in specifications, technical papers, and engineering discussions. The tests concern attributes of the total vehicle system rather than those of its subsystems and components. Tests of components such as batteries are the subject of separate procedures.The road tests specified in this document are recommended for use whenever possible particularly to establish vehicle performance specifications. The dynamometer procedures are included primarily to facilitate development testing.Section 3 provides definitions of terminology used in this document. Section 4 specifies test conditions and instrumentation which are to be used for all the tests specified in this document while Section 5 identifies the data which are to be recorded for all tests. The specific tests covered by this document are:Acceleration Characteristics on a Level Road (Section 6)Gradeability Limit (Section 7)Gradeability at Speed (Section 8)Deceleration (Section 9)Coastdown Testing (Section 10)
下载地址: 点击此处下载
基本信息
标准名称:手持式电动工具的安全 第二部分:电剪刀和电冲剪的专用要求
英文名称:Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for sheet metal shears and nibblers
中标分类: 电工 >> 电气设备与器具 >> 电动工具
ICS分类: 机械制造 >> 手持工具 >> 电动工具
替代情况:GB 3883.8-1991;被GB 3883.8-2012代替
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2005-02-06
实施日期:2005-08-01
首发日期:1985-11-04
作废日期:2013-05-01
主管部门:中国电器工业协会
提出单位:中国电器工业协会
归口单位:全国电动工具标准化技术委员会
起草单位:上海电动工具研究所
起草人:刘江、李邦协、李宏照、播顺芳、金轶
出版社:中国标准出版社
出版日期:2005-08-01
页数:16开, 页数:7, 字数:11千字
计划单号:20021363-Q-604
书号:155066.1-22473
适用范围

本部分适用于电剪刀和电冲剪。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 电工 电气设备与器具 电动工具 机械制造 手持工具 电动工具
【英文标准名称】:Plainbearings;leadandtincastingalloysformultilayerplainbearings;identicalwithISO4381:1991
【原文标准名称】:滑动轴承.多层滑动轴承用铅锡铸造合金
【标准号】:DINISO4381-1992
【标准状态】:作废
【国别】:德国
【发布日期】:1992-11
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:化学成份;名称与符号;物理的;机械性能;规范(审批);多层料滑动轴承;材料;锡;锡合金;轴承合金;铅合金;滑动轴承;白合金;铅;组分;特性;铸造合金;轴承;合金
【英文主题词】:
【摘要】:
【中国标准分类号】:J12;H62
【国际标准分类号】:3460;6210
【页数】:6P;A4
【正文语种】:德语